Successfully Added to Cart
Customers also bought...
-
DNA/RNA Shield (50 ml)Cat#: R1100-50DNA/RNA Shield reagent is a DNA and RNA stabilization solution for nucleic acids in any biological sample. This DNA and RNA stabilization solution preserves the...
-
DNA/RNA Shield SafeCollect Swab Collection Kit, 1ml (1 collection kit)Cat#: R1160The DNA/RNA Shield SafeCollect Swab Collection Kit is a user-friendly collection kit for stabilizing the nucleic acid content of samples collected with a swab. DNA/RNA Shield completely inactivates harmful pathogens...
Quick-DNA/RNA Microprep Plus Kit
Cat # | Name | Size |
---|
Highlights
- Quick & Easy: Extract DNA and RNA from any sample including cells, solid tissue, whole blood, biological liquids, FFPE tissue, environmental (plant/seed), swabs (stool, soil, microbial samples), etc.
- Sensitive: Single cell-level recovery of DNA and RNA.
- Ultra-Pure: Ready for Next-generation sequencing, RT-qPCR, arrays, etc. DNase I included (Plus kit and MagBead only)
Documents
Product Description
Technical Specifications
Equipment | Microcentrifuge, vortex, and heat block/bath (55°C) |
---|---|
Purity | DNA and RNA are ready for Next-Gen Sequencing, RT-PCR, microarray, hybridization, etc. A260/A280, A260/A230: >1.8. |
Sample Source | Any cells, solid tissue, whole blood, biological fluids, FFPE tissue, and samples stored in DNA/RNA Shield, etc. |
Size Range | Genomic DNA ≥40 kb and Total RNA ≥17 nt |
Yield | ≤ 5 µg DNA and ≤ 10 µg RNA |
Resources
Q1: Is DNase I available for individual purchase?
Yes, the catalog number for the DNase I set (DNase and DNA Digestion Buffer) that we offer is E1010.
Q2: Can I use other DNase I enzymes (or sets)? (e.g. Qiagen DNase I)?
The kit is optimized with Zymo Research's DNase, however DNase from other manufacturers can be used. Follow the respective protocol for on-column DNase treatment. If the DNase does not have a protocol, proceed with in-tube DNase treatment post-extraction, then purify using the RNA Clean & Concentrator-5.
Q3: How to store DNase-I following resuspension?
Aliquot and store at – 20°C. Minimize multiple freeze thaw cycles. Lyophilized DNase I is stable at room temperature.
Q4: Is this kit suitable for very small numbers of cells?
Yes, the Quick-DNA/RNA MicroPrep Plus (#D7005) is capable of isolating from single cell inputs (picogram amounts). A sensitive quantification method is needed (e.g. Qubit, qPCR, etc.)
Q5: Is the DNase-I treatment necessary?
If the downstream application requires DNA-free RNA, we recommend performing the DNase I treatment.
Q6: Is it possible to extract proteins with the Quick-DNA/RNA kit?
Yes, proteins can be precipitated. Please refer to the protocol appendix.
Q7: I ran out of DNA/RNA Wash Buffer. Can I use something else?
Yes. Use 80% ethanol as a substitute. DNA/RNA Wash Buffer is also sold separately.
Q8: Is the DNA and RNA suitable for Next-Gen sequencing or other sensitive downstream applications
Yes, both DNA and RNA is high quality (A260/A280 >1.8, A260/A230 >1.8) and suitable for any downstream application, including NGS, qPCR, etc.
Q9: Will the kit isolate small RNAs?
Yes, this kit will isolate small/micro RNA’s ≥ 17 nucleotides.
Q10: Can I freeze my samples in DNA/RNA Lysis Buffer for later processing?
Yes, freeze samples at -80°C after samples are lysed/homogenized in DNA/RNA Lysis Buffer. Bring the sample to room temperature prior to RNA purification.
Q11: Is the kit compatible with samples stored in DNA/RNA Shield?
Yes, bring samples homogenized and stored in DNA/RNA Shield to room temperature (20-30ºC). Add 1 volume of DNA/RNA Lysis Buffer (1:1) and mix well. Proceed with DNA Purification.
Q12: How should I proceed with this kit if my sample is in RNAlater™?
Cells - Pellet by centrifugation at up to 5,000 x g and remove RNAlater™ (supernatant). Proceed to Sample Preparation, see protocol.
Tissue - Transfer into a new tube with forceps and remove any excess RNAlater™. Proceed to Sample Preparation, see protocol.
Alternatively, for liquid samples from which RNAlater™ cannot be removed, add 1 volume of nuclease-free water (or PBS) to 1 volume liquid sample (1:1) and mix. Then add 4 volumes DNA/RNA Lysis Buffer to 1 volume sample/water (or PBS) mixture (4:1). Mix again and proceed to Total RNA Purification, see protocol.
Q13: Can I still use DNA/RNA Shield if a precipitate has formed?
This can happen on occasion due to transport or storage at lower temperatures. The reagent functionality is not affected; however, the precipitate can be resolved by heating the reagent to >37 °C.
Cat # | Name | Size | |
---|---|---|---|
R1200-25 | DNA/RNA Shield (2X Concentrate) | 25 ml | |
W1001-10 | DNase/RNase-Free Water | 10 ml | |
C1004-50 | Zymo-Spin IC Columns | 50 Pack | |
R1200-1-5 | PK Digestion Buffer | 5 ml | |
C1001-50 | Collection Tubes | 50 Pack | |
D7010-2-50 | DNA/RNA Prep Buffer | 50 ml | |
D7001-1-50 | DNA/RNA Lysis Buffer | 50 ml | |
D7010-3-24 | DNA/RNA Wash Buffer (Concentrate) | 24 ml | |
E1010-1-4 | DNA Digestion Buffer | 4 mL | |
C1103-50 | Zymo-Spin IC-XM Columns | 50 Pack | |
“This kit was invaluable. I was able to get at least 1 ug of RNA and several hundred nanograms of DNA from each sample - all of it high quality. Much better than my previous experience with a different dual DNA/RNA isolation kit.”
- Julie P. (CU Anschutz Medical Campus)
“I usually recommend this kit for those who want to extract both DNA and RNA from a single sample. We have even had great quality and yield for single insect samples.”
- Robert B. (Harvard University)
"The kit is very economical for simultaneous extraction of high quality DNA and RNA from very small amount of biological samples. More particularly, RNA is of good quality that suits best for applications like next-generation sequencing (RNA-Seq)."
- Muhammad A. (Northwestern University)
Need help? Contact Us